chptr 3 NEW BILLION DOLLAR CROP PM Magazine

R

Rokerijdude11

Guest
Your all pretty smitten with Popular Mechanics when it comes to 9-11 so here is an article on Marijuana and hemp

http://jackherer.com/chapter03.html

====================================
February 1938: Popular Mechanics Magazine:

"NEW BILLION-DOLLAR CROP"

February 1928: Mechanical Engineering Magazine:

"THE MOST PROFITABLE & DESIRABLE CROP THAT CAN BE GROWN"

Modern technology was about to be applied to hemp production, making it the number one agricultural resource in America. Two of the most respected and influential journals in the nation, Popular Mechanics and Mechanical Engineering, forecast a bright future for American hemp. Thousands of new products creating millions of new jobs would herald the end of the Great Depression. Instead hemp was persecuted, outlawed and forgotten at the bidding of W.R. Hearst, who branded hemp the "Mexican killer weed, marihuana."

As early as 1901 and continuing to 1937, the U.S. Department of Agriculture repeatedly predicted that, once machinery capable of harvesting, stripping and separating the fiber from the pulp was invented or engineered, hemp would again the America's number one farm crop. The introduction of G.W. Schlichten's decorticator in 1917 nearly fulfilled this prophesy. (See pages 13-15 and Appendix.)

The prediction was reaffirmed in the popular press when Popular Mechanics published its February, 1938 article, "Billion-Dollar Crop." The first reproduction of this article in over 50 years was in the original edition of this book. The article is reproduced here exactly as it was printed in 1938.

Because of the printing schedule and deadline, Popular Mechanics prepared this article in Spring of 1937 when cannabis hemp for fiber, paper, dynamite and oil, was still legal to grow and was, in fact, an incredibly fast-growing industry.

Also reprinted in this chapter is an excerpt from the Mechanical Engineering article about hemp, published the same month. It originated as a paper presented a year earlier at the February 26, 1937 Agricultural Processing Meeting of the American Society of Mechanical Engineers, New Brunswick, New Jersey.

Reports from the USDA during the 1930s and Congressional testimony in 1937 showed that cultivated hemp acreage had been doubling in size in America almost every year from the time it hit its bottom acreage, 1930 - when 1,000 acres were planted in the U.S. - to 1937 - when 14,000 acres were cultivated - with plans to continue to double that acreage annual in the foreseeable future.

As you will see in these articles, the newly mechanized cannabis hemp industry was in its infancy, but well on its way to making cannabis America's largest agricultural crop. And in light of subsequent developments (e.g. biomass energy technology, building materials, etc.), we now know that hemp is the world's most important ecological resource and therefore, potentially our planet's single largest industry.

The Popular Mechanics article was the very first time in American history that the term "billion-dollar"* was ever applied to any U.S. agricultural crop!

*Equivalent to $40-$80 billion now.

Experts today conservatively estimate that, once fully restored in America, hemp industries will generate $500 billion to a trillion dollars per year, and will save the planet and civilization from fossil fuels and their derivatives - and from deforestation!

If Harry Anslinger, DuPont, Hearst and their paid-for (know it or not, then as now) politicians had not outlawed hemp - under the pretext of marijuana (see Chapter 4, "Last Days of Legal Cannabis") - and suppressed hemp knowledge from our schools, researchers and even scientists, the glowing predictions in these articles would already have come true by now - and more benefits than anyone could then envision - as new technologies and uses continue to develop.

As one colleague so aptly put it, "These articles were the last honest word spoken on hemp's behalf for over 40 years..."

New Billion-Dollar Crop Popular Mechanics, February 1938

American farmers are promised new cash crop with an annual value of several hundred million dollars, all because a machine has been invented which solves a problem more than 6,000 years old. It is hemp, a crop that will not compete with other American products. Instead, it will displace imports of raw material and manufactured products produced by underpaid coolie and peasant labor and it will provide thousands of jobs for American workers throughout the land. The machine which makes this possible is designed for removing the fiber-bearing cortex from the rest of the stalk, making hemp fiber available for use without a prohibitive amount of human labor. Hemp is the standard fiber of the world. It has great tensile strength and durability. It is used to produce more than 5,000 textile products, ranging from rope to fine laces, and the woody "hurds" remaining after the fiber has been removed contains more than seventy-seven per cent cellulose, and can be used to produce more than 25,000 produces, ranging from dynamite to Cellophane.

Machines now in service in Texas, Illinois, Minnesota and other states are producing fiber at a manufacturing cost of half a cent a pound, and are finding a profitable market for the rest of the stalk. Machine operators are making a good profit in competition with coolie-produced foreign fiber while paying farmers fifteen dollars a ton for hemp as it comes from the field.

From the farmers' point of view, hemp is an easy crop to grow and will yield from three to six tons per acre on any land that will grow corn, wheat, or oats. It has a short growing season, so that it can be planted after other crops are in. It can be grown in any state of the union. The long roots penetrate and break the soil to leave it in perfect condition for the next year's crop. The dense shock of leaves, eight to twelve feet about the ground, chokes out weeds. Two successive crops are enough to reclaim land that has been abandoned because of Canadian thistles or quack grass.

Under old methods, hemp was cut and allowed to lie in the fields for weeks until it "retted" enough so the fibers could be pulled off by hand. Retting is simply rotting as a result of dew, rain and bacterial action. Machines were developed to separate the fibers mechanically after retting was complete, but the cost was high, the loss of fiber great, and the quality of fiber comparatively low. With the new machine, known as a decorticator, hemp is cut with a slightly modified grain binder. It is delivered to the machine where an automatic chain conveyer feeds it to the breaking arms at the rate of two or three tons per hour. The hurds are broken into fine pieces which drop into the hopper, from where they are delivered by blower to a baler or to truck or freight car for loose shipment. The fiber comes from the other end of the machine, ready for baling.

From this point on almost anything can happen. The raw fiber can be used to produce strong twine or rope, woven into burlap, used for carpet warp or linoleum backing or it may be bleached and refined, with resinous by-products of high commercial value. It can, in fact, be used to replace the foreign fibers which now flood our markets.

Thousands of tons of hemp hurds are used every year by one large powder company for the manufacturer of dynamite and TNT. A large paper company, which has been paying more than a million dollars a year in duties on foreign-made cigarette papers, now is manufacturing these papers from American hemp grown in Minnesota. A new factory in Illinois is producing fine bond papers from hemp. The natural materials in hemp make it an economical source of pulp for any grade of paper manufactured, and the high percentage of alpha cellulose promises an unlimited supply of raw material for the thousands of cellulose products our chemists have developed.

It is generally believed that all linen is produced from flax. Actually, the majority comes from hemp - authorities estimate that more than half of our imported linen fabrics are manufactured from hemp fiber. Another misconception is that burlap is made from hemp. Actually, its source is usually jute, and practically all of the burlap we use is woven by laborers in India who receive only four cents a day. Binder twine is usually made from sisal which comes from Yucatan and East Africa.

All of these products, now imported, can be produced from home-grown hemp. Fish nets, bow strings, canvas, strong rope, overalls, damask tablecloths, fine linen garments, towels, bed linen and thousands of other everyday items can be grown on American farms. Our imports of foreign fabrics and fibers average about $200,000,000 per year; in raw fibers alone we imported over $50,000,000 in the first six months of 1937. All of this income can be made available for Americans.

The paper industry offers even greater possibilities. As an industry it amounts to over $1,000,000,000 a year, and of that eighty per cent is imported. But hemp will produce every grade of paper, and government figures estimate that 10,000 acres devoted to hemp will produce as much paper as 40,000 acres of average pulp land.
 
Werbung:
and here we have Popular mechanics also supporting Jack Herers book ,oh wait thats Right Jack actually used PM articles in his book so the entire articles are included in the chapter


isnt Popular mechanics the magazine you all rave over theyre de-bunking of 9-11?
well since theyre so great then everything theyve written about Hemp and the new Billion dollar crops has to be true as well i mean they are the Pillar of integrity right?


even though they are owned by questionable publishers

anyways never mind chapter one the beginning ill be waiting
 
Back
Top